LIST OF INDIAN STANDARD CODES

LIST OF INDIAN STANDARD CODES
  • IS 1172:1993 Code of basic requirements for water supply, drainage and sanitation
  • IS 1742:1983 Code of practice for building drainage
  • IS 2064:1993 Code of practice for selection, installation and maintenance of sanitary appliances
  • IS 2065:1983 Code of practice for water supply in buildings
  • IS 2470(Part 1):1985 Code of practice for installation of septic tanks: Part I design, criteria and construction
    IS 2470(Part 2):1985 Code of practice for installation of septic tanks: Part 2 Secondary treatment and disposal of septic tank effluent
  • IS 3114:1994 Code of practice for laying of cast iron pipes
  • IS 4111(Part 1):1986 Code of practice for ancillary structures in sewerage system: Part I Manholes
  • IS 4111(Part 2):1985 Code of practice for ancillary structures in sewerage system: Part II Flusing tanks
  • IS 4111(Part 3):1985 Code of practice for ancillary structures in sewerage system: Part III Inverted syphon
  • IS 4111(Part 4):1968 Code of practice for ancillary structures in sewerage system: Part 4 Pumping stations and pumping mains (rising mains)
  • IS 4111(Part 5):1993 Code of practice for ancillary structures in sewerage system: Part 5 Tidal outfalls
  • IS 4127:1983 Code of practice for laying of glazed stoneware pipes
  • IS 5329:1983 Code of practice for sanitary pipe work above ground for buildings
  • IS 5611:1987 Code of practice for construction of waste stabilization ponds (faculative type)
  • IS 5822:1994 Code of practice for laying of electrically welded steel pipes for water supply
  • IS 6280:1971 Specification for sewage screens
  • IS 6295:1986 Code of practice for water supply and drainage in high altitudes and/or sub-zero temperature regions
  • IS 6924:1973 Code of practice for the construction of refuse chutes in multistoreyed buildings
  • IS 7090:1985 Guidelines for rapid mixing devices
  • IS 7208:1992 Guidelines for flocculator devices
  • IS 7232:1974 Method for imhoff cone test
  • IS 7558:1974 Code of practice for domestic hot water installations
  • IS 7740:1985 Code of practice for construction and maintenance of road gullies
  • IS 8413(Part 1):1977 Requirements for biological treatment equipment: Part 1 Trickling filters
  • IS 8413(Part 2):1982 Requirements for biological treatment and equipment: Part 2 Activated sludge process
  • IS 8419(Part 1):1977 Requirements for filtration equipment : Part 1 Filtration media – sand and gravel
  • IS 8419(Part 2):1984 Requirements for rapid sand gravity filtration equipment: Part 2 Underdrainage system
  • IS 9110:1979 Specification for hand operated augers for cleaning water-closets pipes and sewers
  • IS 9222(Part 1):1990 Recommendations for handling and dosing devices for chemicals for water treatment: Part I Coagulants
  • IS 10037(Part 1):1981 Requirements for sludge dewatering equipment: Part I Sludge drying beds-sand and gravel
  • IS 10037(Part 2):1983 Requirements for sludge de-watering equipment: Part 2 Vacuum filtration equipment
  • IS 10037(Part 3):1983 Requirements for sludge de-watering equipment: Part 3 Centrifugal equipment (Solid bowl type)
  • IS 10053:1981 Requirements for equipment for jackson candle turbidimeter and determination of turbidity
  • IS 10261:1982 Requirements for settling tank (clarifier equipment) for waste water treatment
  • IS 10313:1982 Requirements for settling tank (clarifier equipment) for water treatment plant
  • IS 10446:1983 Glossary of terms relating to water supply and sanitation
  • IS 10552:1983 Specification for buckets to be used in power driven bucket type sewer cleaning machine
  • IS 10553(Part 1):1983 Requirements for chlorination equipment: Part I General guidelines for chlorination plants including handling, storage and safety of chlorine cylinders and drums
  • IS 10553(Part 2):1983 Requirements for chlorination equipment: Part 2 Vacuum feed type chlorinators
  • IS 10553(Part 4):1983 Requirements for chlorination equipment: Part 4 Gravity feed type gaseous chlorinators
  • IS 10553(Part 5):1987 Requirements of chlorination equipment: Part 5 Bleaching powder solution feeder displacement type chlorinator
  • IS 10595:1983 Requirements for power driven bucket-type sewer cleaning machine
  • IS 11117:1984 Requirements for power driven rodding machine for sewers
  • IS 11208:1985 Guidelines for registration of plumbers
  • IS 11387:1985 Requirements for high pressure jetting machine for sewer cleaning
  • IS 11397:1985 Specification for attachment tools for power driven rodding machine for sewers
  • IS 11401(Part 1):1985 Requirements for slow sand filters: Part 1 General guidelines
  • IS 11401(Part 2):1990 General requirements for slow sand filters: Part 2 Design, construction, operation and maintenance
  • IS 11906:1986 Recommendations for cement mortar lining for cast iron mild steel and ductile-iron pipes and fittings for transportation of water
  • IS 11925:1986 Specification for pitch-impregnated fibre pipes and fittings for drainage purposes
  • IS 11931:1987 Specification for sewer cleaning metal rods
  • IS 11972:1987 Code of practice for safety precautions to be taken when entering a sewerage system
  • IS 12183(Part 1):1987 Code of practice for plumbing in multi-storeyed buildings: Part 1 Water supply
  • IS 12251:1987 Code of practice for drainage of building
  • IS 12288:1987 Code of practice for use and laying of ductile iron
  • IS 12314:1987 Code of practice for sanitation with leaching pits for rural community
  • IS 13166:1992 Guidelines for evaluation and testing of mechanical surface aerators
  • IS 13496:1992 General requirements of suction machine for cleaning sewers, manholes and ancillary structures provided on sewer line and closed storm water
  • SP 35(S&T): 1987 Handbook on water supply and drainage with special emphasis on plumbing