Duration
85-Days
Refine your skills with 6 Projects
Study deeper with MEP Projects
Placement Assistance 100%
Learning Sequence
Our learning path guides you through course by course and at the end end of the course you’ll master all the topics in MEP Engineering
Course 1HVAC Design & Drafting
AutoCAD is a designing software on which you will learn the designing of HVAC Systems like ducts, piping systems to create and integrate the heating cooling components.
Initially you’ll learn the preferences and definitions that fits to the project and after which you’ll start the drawing and assign the systems and the flows goes on.
Course content
- Basic Properties
- Configuring Duct System Settings
- AutoCAD HVAC Layer Standards
- HVAC System Settings
- Workflows
- Drawing Ductwork
- Duct Snaps
- Duct Supports
- About Duct System Displays
- About Duct Connectors
- Creating HVAC Shop Drawing
HVAC Designing
HVAC Training courses in Bangalore is one of the most demanded courses in MEP. Our academy is the best place to start your journey towards progressive career into the industry. We help students achieve the best of knowledge and skill through our professional training and expertise by helping them to master technical aspects of design, drafting and project. Making you fully aware of the newest concepts and help you stay innovative throughout the course, is our promise.
Course Modules
Introduction to HVAC.
- Basic Fundamentals about HVAC.
- Heat Transfer Concepts.
- Modes of Heat Transfer.
- Basic properties of the air.
- Types of Heats around in room.
- Applications of HVAC industry used in different fields.
- Conversions of all Dimensioning systems.
- Units of all Designing systems.
Psychometry
- Identifying Psychrometric chart.
- Identifying psychrometric values like Dry bulb Temperature, Wet bulb Temperature, Relative Humidity, Humidity ratio, Dew point Temperature Enthalpy.
- Calculations on psychrometric Chart.
- Finding the values of sensible heating, sensible cooling, Humidification and Dehumidification.
- Process of cooling-Humidification and Heating-Dehumidification.
Basic Components of Air-Conditioning and Refrigeration machines.
- Basic Refrigeration System or Vapor Compression Cycle.
- Working process of all components in refrigeration system like compressor , condenser, expansion valve and condenser
- Pressure – Enthalpy Chart for Refrigeration cycle.
- Accessories used in HVAC System.
- Process of pressure testing in Refrigeration system
- Learning about Refrigerants
- Properties of refrigerants
- Temperature of refrigerants like Boiling point and melting point temperatures.
- Applications of Refrigerants.
Classification of Air-Conditioning System.
- Window A/C
- Split A/C
- Variable Refrigerant Volume (VRV)/Variable Refrigerant Flow (VRF)
- Package Units
- Central Plant Chill Water System
Categories of Air Conditioning.
- Classifications of Air conditioning systems and their equipments.
- Classifications of HVAC systems.
- All air system
- All water system
- Air – water system
- Direct Refrigerant system
Heat Load Calculations.
- Survey of Building
- Finding Temperature difference(ΔT) (Wall, Glass, Roof , Partition)
- Finding ‘U’ Factor (Wall, Glass, Roof, Partition)
- Finding Ventilation requirement for IAQ
- Load Calculations (Manually using E-20 form)
- ESHF, ADP & Air Flow Rate(CFM) Calculation
Air Distribution System.
- Duct-Definition
- Duct designing using Methods ; (Velocity Reduction method, Equal Friction method, Static Regain method).
- Duct sizing as per Aspect Ratio
- Finding Duct size using Ductulator
- Calculation of Number of sheets for Duct
- Gauge selection for Sheet Metal
- Bill of Materials for Duct Network/li>
- Selection of Diffusers and Grilles
- Duct Routing – Preparation of single line diagram (SLD)
- Preparation of Layouts (Double line Diagram – DLD) as per SMACNA rules
Static Pressure Calculation.
- Selection of Motor HP
- Selection Fan/Blower RPM
Chiller piping System.
- Classification of Water Piping
- Pipe sizing for chill water system
- Pump Head Calculation
- Selection of Pump
HVAC software’s.
- XL sheet for Load Calculation.
- XL sheet for Static Pressure.
- XL sheet for Bill of Quantity.
- Duct sizer software for Duct sizing
- Psychrometry Software
Projects
- G+5 Projects.
- HVAC Design Project on Auto-Cad.
- Chiller Design Project on Auto-Cad.
New Topics Added
- Understanding the Green Environmental
- Understanding Projects
- Understanding Green Projects
- LEED-Leadership in Energy Efficiency and Design
- EGBC– Emirates Green Building Council
- ESTIDAMA (Sustainability)
- USGBC-United States Green Building Council
- IGBC– Indian Green Building Council
- ASHRAE– American Society of Heat Refrigeration Air-Conditioning Engineers
- ISHRAE– Indian Society of Heat Refrigeration Air-Conditioning Engineers
- HSE-Health and safety environmental
- Understanding Energy management
- Understanding Grey water system
- Ventilation
- Commercial kitchen ventilation
- Car parking ventilation
- Toilet ventilation
Stair case pressurization
Course 2Electrical Design & Drafting
You will learn AutoCAD electrical software which is used to design the electrical systems like luminaire, light socket, conduits, cables and all the other functionality of Electrical AutoCAD.
Course content
- Introduction to electrical drafting
- Converting Dialux Design into an AutoCAD Design
- Converting Relux Design into an AutoCAD Design
- Inserting AutoCAD Luminaires Symbols
- Creating Circuits
- Designing Cables
- Designing Conduits
- Panel Board Design
ELECTRICAL Design
Electrical Training design consists of Project planning, creating Shop Drawing, execution of electrical equipment, including lighting equipment, power systems, power distribution, fire and life safety systems, electronic components, and voice and data communications infrastructure.
Course Modules
- Introduction to Electrical system
- Basics of Electrical
- Electrical Units
- Voltage, Current, Power (Real & Reactive power)
- Why electrical is necessary in MEP
- Standards – NBC, IEC, IS, NEPA, DEWA, ADEWA, NEMA
- Lights
- Classification of lights
- Properties of lights
- Interior lighting based on lux level
- Exterior lighting based on lux level
- Calculations
- Manual calculations
- Software – relux, Dialux
3.Fan selection
- Ceiling fan selection
- Exhaust fan selection
- Ceiling fan rod length selection
4.Sockets
- Power sockets
- Light sockets
- Ac points
- Geyser points
- Holder points etc..
5. Load scheduling
- Total no.of connected units
- Demand load (W or KW)
- Diversity factor
- Connected load (w or kw)
6. Circuits
- Need for circuits
- Classification of circuits
- Calculations based on Indian standards,DEWA Standard, British standards
7. Phase distribution
- Need for phase distribution
- Scheduling phases (R,Y,B)
- Justification for 1 phase & 3 phase requirements
8. Panel board
- Requirement of Panel board classification
- Types of Panel Boards (MCB,SMDB,SDB,DB)
- Selection of panel boards
9. Circuit breaker selection
- Need for Circuit breaker
- Classification of circuit breaker (MCB, MCCB, ACB, VCB, OCB, etc…)
- Calculating rated current (I rated)
- Breaking capacity of circuit breakers
- Types of circuit breakers (Type A, Type B, Type C, Type D)
- Cables
- Introduction to cables
- Types of Cable & Cable insulation
- Cable sizing
- Voltage drop calculation (Vd)
- De-rating current calculation
- Transformer selection
- Why transformers are measured in KVA
- Types of Transformers
- KVA Calculation
- Losses in Transformer
12.Generator selection
- Need for generators
- Generator calculation (KVA)
- Diesel requirement
- Diesel tank sizing
13. Conduits & Cable tray
- Conduits classification (PVC Conduit, GI Conduits)
- Conduit sizing
- Cable factor calculation
- Cable tray sizing
- Cable tra routing (SLD & DLD)
- Earthing
- Need for earthing system
- Types of earthing system (TT Systems,TN System, TT TN System)
- Road & pipe earthing system
- Plate & pipe earthing system
Strip earthing
- Lightning protection
- Introduction to lightning protection system
- Probable no of strokes calculation
- Lightning arrestors
- Down connectors
16.Capacitor bank selection
- Need for Power factor improvement
- Calculation reactive power requirement
- Load current reduction concepts
- Solar panel
- Advantages of solar system
- Selection of Batteries
- Selection of Inverter (VA or KVA)
- Solar power selection (w)
18. CCTV
19. ATS & MTS
20. UPS
- Need for UPS System
- Battery selection
- Inverter Selection (VA or KVA)
21. Electrical draughting
Course 3Plumbing Design & Drafting
You will Learn AutoCAD plumbing software which is used to design systems like cold water, hot water and drainage systems
Course content
- Introduction to plumbing Drafting
- Drafting plumbing fixtures
- Creating Cold water supply
- Hot water supply
- Sewer pipes
- Vent pipe
- Floor trap
Plumbing
The Plumbing design involves water management, drainage system and storm water system to influence the water efficiency, sustainability for the facility. After finishing the course you will be able to design, Draft and execute the plumbing systems.
Course Modules
Introduction to Plumbing System
Standards
- UPL – Uniform Plumbing Codes
- IPC – International plumbing codes
- NPC – National plumbing codes
Piping specification
- Soil pipe
- Strum pipe
- Vent pipe
- Sewer pipe
Water requirement
Tank sizing
- OHT (Over head tank)
- UGT (Under ground tank)
Hot water system
Plumbing in high rise building
Hydro pneumatic system
Drain waste vent
Private waste dispose
Drainage system
Storm water drainage
Green plumbing
Course 4Firefighting Design & Drafting
Firefighting design training deals with fire protection engineering fundamentals, water supply for fire protection, fire extinguishing, fire alarm systems, special occupancies and hazards, and storage of flammable and hazardous materials.
Course content
Course Modules
- Requirement of fire fighting
- Standards – NEFA, NBA
- Understanding hazardous of the building
- Classification of fire fighting of the system
- Building Classification
- Standards
- Selection of rise
- Sprinkler system
- Foam system
- Gas suppression system
- Helipads
- Introduction to fire extinguisher
- Classification of fire
- Types of fire extinguisher
- Introduction to Sprinkler
- ‘Working of sprinkler system
- Hydronic calculation (Water calculation)
- Deluge systems
- Fm 200
- Requirements for gas suppression system
- Software for fm 200 calculation
- Need for foam system
- Foam system calculation
- Types of foam
- Cleaning agents (AFFF)
- Active system
- Passive system
- Heat detectors
- Smoke detectors
- Manual call points
- Zoning
- Introduction to Sprinkler
- ‘Working of sprinkler system
- Hydronic calculation (Water calculation)
- Deluge systems
Join Today!
New batch starts every 1st, 11th and 21st
Duration : 45 Days
Fast track courses available.
Weekend batches available.




